Car model and year:
Audi A4 1.8T 2007 163hp
Tool to use:
I read this with Fgtech Galletto v54 with OBD-
1.8 Turbo 150/180CV ME7.5.1 29f400BB..galletto say change driver
1.8/2.0 Turbo 150/180CV ME7.5.5 29f800BB....read success...100% Ignition off...
Symptoms:
Will write the remap....he wants to drive off...car not start
VCDS go ECU an read fault code say "programming process not finished"
I have just read, not write...
100% working solution:
The car is running
What I did as follows:
-> I remove fuses from Dash and Radio\Navi
-> use a good bosch powersupply (14V)
-> delet all fault code VCDS
-> write the same file was read before with Fgtech Galletto
-> note all prompts from galletto about ingnition on/off
-> car start....running
-> delet all fault code VCDS
